...
Then the screen will display the Setup Wizard Welcome screen, where you should click Next (Fig. 2).
Warning |
---|
The software interface is not localized yet, so please, use the following set of screenshots. |
Fig. 2 – start of installation
...
As a result of your settings when starting the Certificates storage via Start→All Programs→MOEX EDS DSSK→Certificates Programs→(ПКЗИ СЭД МБ) MOEX EDS DSSK→(Справочник сертификатов) Certificates storage, an interface in Russian will be displayed (Fig. 10).
...
Anchor | ||||
---|---|---|---|---|
|
To work in the Web-client it is initially necessary to connect to the Electronic Document Interchange (EDI) system. To do this:
certificate of registration with private key;
Panel |
---|
The key and the certificate of registration are not intended to provide security of the transmitted information. They will be added to the Certificates storage for the generation of the private and public key and creating of a request to issue a certificate for the Moscow Exchange. The key and the registration certificate are to be copied to the root folder on any external drive, such as a usb-stick. |
Once all the necessary documents are prepared, you can proceed to the technical part.
Certificate of registration are used for:
generation of user's private and public key;
creation of a request to issue a public key certificate.
Depending where the certificate is stored (external hard drive or a computer), the order they are added to the Certificates storage and making a request will differ.
If the key and the certificate of registration are stored on the user's computer | If the key and the certificate of registration are stored on an external drive | |||||
---|---|---|---|---|---|---|
During the first start a window will open informing you that you need to insert an external drive. As the key and the certificate of registration are located on your computer, skip this step and click Cancel | Before you begin, insert an external drive in the usb-port on your computer, then run the Certificates storage. This opens a window where you will need to select device containing the key and certificate of registration (1) and click OK (2)
| |||||
During the initial connection the user only has a certificate of registration, so skip this step by clicking Cancel
| As a result the key and the certificate of registration will be added automatically. The screen will display a message containing information about the added files, where you need to click OK | |||||
Next the storage will be automatically checked for the presence of a personal certificate. During the first start a personal certificate and copies of storagies are not available. Skip step by clicking No | The certificate of registration will serve as a basis for creating a personal and local storage (profile). The personal storage is confirmed with an electronic signature using the registration key. The personal storage will display the certificate of Moscow Exchange, and the user’s registration certificate in Certificates of registration section | |||||
Then the screen will sequentially display windows for selecting the certificate of registration, where you need to click OK and Yes respectively | Next, a message will appear informing you that the personal storage is protected with the registration certificate. In this window you need to click OK to create private keys and make a request for their confirmation (see Generation of user keys and creating a request) | |||||
The window for adding a certificate of registration will appear, where you need to select the certificate file and click Open. The registration key will be imported automatically (provided that it is next to a certificate, in the same folder)
| ||||||
Next, the screen displays information about adding certificates of registration The certificate of registration will serve as a basis for creating a personal and local storage. The personal storage is confirmed with an electronic signature using the registration key. The personal storage will display the certificate of Moscow Exchange, and the user’s registration certificate under Certificate of registration Click OK to continue working in the storage | ||||||
Next, you will need to generate your public and private key and a request for their confirmation by the Moscow Stock Exchange by clicking OK
|
Anchor | ||||
---|---|---|---|---|
|
Public and private key are created simultaneously with the request to the Certification Authority to issue a certificate. Keys cannot be used to protect information transmitted until they are certified by the Certification Authority (the Moscow Exchange). Therefore, a request is made for their confirmation, which contains information about the generated public key (Fig. 12) and information about the user, automatically added from the certificate of registration. The Moscow Exchange (CA) responds with an email containing certificate signed by the CA root certificate.
If the certificate of registration are stored on the computer, after step 7 in the table above, Certificates storage will automatically generate user's private and public keys and a request to issue a public key certificate (Fig. 12).
If the certificate of registration are stored on an external drive, to generate keys and make a request select the Справочник сертификатов (Certificates storage in the menu menu) (Fig. 11.1) → Сформировать запрос на получение сертификата (Generate certificate request) (Fig. 11.2), or click an icon on the toolbar.
Fig. 11 – generation of a request
In the Certificate request dialog box, click OK (Figure 12). This will open the Export files for the Registration Centers, where you should select a folder to which the request will be saved and click the Save button (Fig. 13).
Fig. 12 – request parameters Fig. 13 – export files
The resulting request (a *.pse file) needs to be compressed and sent to pki@moex.com, with a scanned and signed registration certificate (document) attached. The subject field should specify the name of the organization and the required scope of the certificate (for example, the Oblachnye Investitsii CJSC – exchange market EDI, stock market EDI). The Moscow Exchange will respond with a letter with an attached ZIP-file of the certificate. This certificate must be added to the Certificates storage.
Panel |
---|
The resulting certificate is valid only for the generated public and private key that is stored on the user's computer. Therefore, a certificate from the Moscow Exchange must be added to the Certificates storage installed on the same computer, where the certificate issue request was generated! |
Anchor | ||||
---|---|---|---|---|
|
To add a certificate to the Certificates storage:
select Справочник сертификатов (Certificates storage)→Импортировать сертификат в локальный справочник (Import Certificate) to the local storage (see Figure 14). This will open a window to select the certificate file (Fig. 15);
This will open a window informing the certificate was successfully added to the Certificates storage, where you need to click OK (Figure 17). Example of adding a certificate is presented in Fig. 18.
Fig. 17 – informative message Fig. 18 – example of adding a certificate
Then the certificate must be set as default. To do this, select the added certificate, right-click on the shortcut menu, and select select Сделать сертификат рабочим (Make certificate workable) (Fig. 19).
Fig. 19 – selecting the working certificate
After adding a personal certificate to the Certificates storage, the personal storage is signed on the member’s personal certificate. The generation of a digital signature for sent messages is ensured by the private key.
Panel |
---|
Settings will be automatically applied to 64-bit Certificates storage. |
Anchor | ||||
---|---|---|---|---|
|
To install Java, follow the diagram shown in Fig. 20
Fig. 20 – scheme of Java installation
Anchor | ||||
---|---|---|---|---|
|
To make Java applet work with Certificates storage, the user must install the appropriate Java API. To do this, download the Java API package (download link) and run the installation file. This opens a security Windows OS window (Fig. 21), where you need to click Run.
Fig. 21 – start of installation
Then the screen will display the Setup Wizard Welcome screen, where you should click Next (Fig. 22).
Fig. 22 – start of installation
After that the screen will open dialogs, preparing for installation as described in Table 2.
Table 2 – installation of the Certificates storage
Dialog box | Action |
---|---|
In this window you will be prompted to enter full name and company name. We recommend skipping this step by clicking on the Next button | |
In this window you will be asked to specify a destination folder (by default C:\ Program Files (x86)\ Validata\), using the Browse button. We recommend skipping this step by clicking on the Next button | |
In this window you can select Full installation and click Next | |
In this window click Next to start installation |
After a few minutes the program will be installed on the computer and a dialog will pop up (Fig. 23), where you need to click Finish.
Figure 23 – installation complete
Software installation is complete.
The information for further preparation of the computer and the configuration of the installed components is presented in the following articles: